1. Avoid collision.

這是鐵藝制品要注意到的一點，鐵藝制品在搬運過程中應小心輕放;放置鐵藝制品的地方應是硬物不常碰到的地方;放置鐵藝制品的地面還應保持平整，鐵藝護欄在安裝時應保證其牢固，若搖晃不穩，日久會使鐵藝護欄產生變形，影響鐵藝護欄的使用壽命。

This is the first thing to pay attention to iron products. Iron products should be handled with care during handling; The place where iron products are placed shall be a place where hard objects do not often touch; The ground on which the wrought iron products are placed shall also be kept flat. The wrought iron guardrail shall be firm during installation. If it is unstable, the wrought iron guardrail will deform over time and affect the service life of the wrought iron guardrail.

2.要定期除塵。

2. Remove dust regularly.

戶外塵埃飛揚，日積月累，鐵藝設施上會落上一層浮塵。它會影響鐵藝的色澤，進而導致鐵藝保護膜的破損。所以應定期擦拭戶外鐵藝設施，一般以柔軟件的棉織品擦拭為好。

Outdoor dust is flying, accumulated over time, and a layer of floating dust will fall on iron facilities. It will affect the color of iron art, and then lead to the damage of iron art protective film. Therefore, outdoor iron facilities should be wiped regularly, generally with soft software cotton fabric.

3.要注意防潮。

3. Pay attention to moisture protection.

如果只是一般的戶外空氣濕度，您可以放心鐵藝護欄的防銹性。如逢大霧天氣，應用干棉布擦拭鐵藝上的水珠；若逢雨天，應于雨停后及時把水珠擦干。因我國大部分地區酸雨肆虐，雨后應立即把殘留在鐵藝上的雨水擦干。

If only the general outdoor air humidity, you can rest assured of the rust resistance of iron guardrails. In case of heavy fog, dry cotton cloth shall be used to wipe the water drops on the iron work; In case of rainy days, the water drops shall be wiped dry in time after the rain stops. As acid rain is rampant in most parts of China, the rain remaining on the iron art should be wiped dry immediately after the rain.

4.遠離酸堿

4. Keep away from acid and alkali

酸堿是鐵藝護欄的“頭號殺手”.鐵藝護欄上若不慎沾上酸(如硫酸、食醋)、堿(如甲堿、肥皂水、蘇打水)，應立即用清水把污處沖凈，再用干棉布擦干。

Acid and alkali are the "number one killer" of iron guardrail. If the iron guardrail is accidentally stained with acid (such as sulfuric acid, vinegar), alkali (such as methyl alkali, soapy water and soda water), wash the dirty place with clean water immediately and wipe it dry with dry cotton cloth.

5.消除銹跡

5. Remove rust

如果鐵藝護欄生了銹，不要自作主張用砂紙打磨。銹跡較小較淺的，可用棉紗蘸機油涂于銹處，稍候片刻，用布揩擦便可消除銹跡。若銹跡已經擴大變重，則應請有關技術人員來維修。

If the iron guardrail is rusty, do not polish it with sandpaper. If the rust is small and shallow, cotton yarn can be dipped in engine oil and applied to the rust. After a while, wipe it with a cloth to eliminate the rust. If the rust has expanded and become heavier, please ask relevant technicians to repair it.

以上的信息就是濟南鐵藝大門給小編提供的知識分享，更多的精彩內容請點擊我們的網站： http://www.4hut75.com我們后續會有更多的內容等您查看

The above information is the knowledge sharing provided by Jinan Tieyi gate to Xiaobian. For more wonderful content, please click our website: http://www.4hut75.com We will have more content for you to check later