一、鐵藝大門的邊框材料

1、 Frame material of iron gate

1、近幾年濟南鐵藝大門的邊框都采用矩形管或者方管材料。推拉門采用矩形管較多，鐵藝平開門采用方管較多。其中方管有時還會采用壓花方管（四棱有工藝壓痕的方管）。

1. In recent years, the frame of iron gate is made of rectangular tube or square tube. Sliding doors use more rectangular tubes, and iron swing doors use more square tubes. The square tube is sometimes embossed (square tube with process indentation on four edges).

2、在早些年鐵藝剛剛興起時，采用實心方鋼的邊框較多。隨著鐵藝發展，通過實際施工作業的反饋。小規格的方鋼漸漸不再采用，即便采用實心方鋼材料也是采用大尺寸的方鋼。

2. In the early years when iron art was just emerging, there were many frames made of solid square steel. With the development of iron technology, through the feedback of actual construction work. Small size square steel is gradually no longer used, even if solid square steel is used, large size square steel is also used.

總而言之，鐵藝大門/鐵藝大門邊框常見多使用的材料就是空心方管。因為方管這種材質一方面不易變形，抗變形的強度相比較同重量的實心材料來說要大的多。另一方面在同外尺寸相同的情況下，空心方管的成本要大大低于實心方鋼。

In short, the commonly used material for the iron gate/iron gate frame is hollow square tube. Because the square tube is not easy to deform, its anti-deformation strength is much greater than that of solid materials of the same weight. On the other hand, the cost of hollow square tube is much lower than that of solid square steel under the same external dimension.

二、鐵藝大門的內框、內橫梁

2、 Inner frame and inner beam of iron gate

1、鐵藝大門/鐵藝大門的內框和橫梁常見材料就有方管、矩形管類和平面扁鐵、壓花扁鐵類。

1. The common materials of the inner frame and beam of the iron gate/iron gate are square tube, rectangular tube, flat iron and embossed flat iron.

2、方管、矩形管的特點是更穩固，缺點是內部豎撐需要二次斷開。加工成本略高。平面扁鐵和壓花扁鐵類的特點是工藝感較強，且內部豎撐可一根料不必二次斷開。缺點是兩道扁鐵內側很難噴塑到位，有可能會給后期防銹防腐帶來隱患。

2. The square tube and rectangular tube are more stable, but the disadvantage is that the internal vertical brace needs to be disconnected twice. The processing cost is slightly higher. The flat flat iron and embossed flat iron are characterized by strong technological sense, and the internal vertical support can be a piece of material without secondary disconnection. The disadvantage is that it is difficult to spray plastic on the inside of the two flat iron, which may bring hidden dangers to the later rust prevention and corrosion prevention.

三、鐵藝大門的豎撐

3、 Vertical bracing of iron gate

1、還是由兩種構成，除了我們非常熟悉的方管材料之外就是實心材料類，實心材料分為：方鋼、壓花方鋼、圓鋼、壓花圓鋼、異形鋼、厚扁鋼等等。

1. It is also composed of two kinds. In addition to the square tube material that we are very familiar with, it is solid material. Solid materials are divided into square steel, embossed square steel, round steel, embossed round steel, special-shaped steel, thick flat steel, etc.

2、方管材料的特點是，目測效果厚重、結構穩定。實心材料的特點仍然是工藝感較強，比較出效果。

2. The square tube material is characterized by its thick visual effect and stable structure. Solid materials are still characterized by a strong sense of craftsmanship and better results.

四、鐵藝大門的內部花型

4、 Internal pattern of iron gate

1、內部花型少數情況下會使用方管造型，比如圓形，菱形等幾何圖形。大多數情況下會使用圓鋼、壓花圓鋼、方鋼、壓花方鋼、扁鐵、壓花扁鐵等材料。

1. In a few cases, the internal pattern will use square tube shape, such as round, diamond and other geometric shapes. In most cases, round steel, embossed round steel, square steel, embossed square steel, flat iron, embossed flat iron and other materials will be used.

2、從變形難度上來說一次為方管>方鋼壓花方鋼>圓鋼/壓花圓鋼>扁鐵/壓花扁鐵。

2. In terms of deformation difficulty, the first time is square tube>square steel embossed square steel>round steel/embossed round steel>flat iron/embossed flat iron.

3、補充一點，前幾年比較主流的鐵藝大門中會大量使用鑄鐵花。

3. In addition, a large number of cast iron flowers will be used in the mainstream iron gates in the past few years.

五、鐵藝大門的配件

5、 Accessories for iron gate

1、鐵藝大門/鐵藝大門的配件分為：瑪鋼件、精鑄件、沖壓件、鍛造件幾種。

1. The accessories of iron gate/iron gate are divided into: malleable steel parts, precision casting parts, stamping parts and forged parts.

2、槍尖類大多是采用的鍛造件，即需要加熱加工的配件。其次大量使用的就是沖壓件，工藝性比較強，但價格較低。近幾年來，其他精鑄件和瑪鋼件漸漸減少了。

2. Gun tips are mostly forged parts, that is, parts that need to be heated. Secondly, stamping parts are widely used, which are highly technological, but at a low price. In recent years, other precision castings and malleable steel parts have gradually decreased.

鐵藝大門的幾種制作材料就是如上所講了，您對此有怎樣的疑惑或者需求就來我們網站http://www.4hut75.com咨詢吧！

Several production materials of Iron Art Gate are as mentioned above. If you have any doubts or needs about this, please come to our website http://www.4hut75.com Ask!