濟南輕型鋼結構建筑體系是一種輕型全裝配式鋼結構建筑，主要由結構鋼和功能材料如熱軋輕型H型鋼、輕型焊接型鋼、高頻焊接型鋼、冷彎薄壁型鋼、薄壁鋼板、薄壁鋼管等組成，輔以各種裝飾連接材料，能夠滿足建筑的特定使用功能和特定空間要求。
Jinan light steel structure building system is a kind of light-weight fully assembled steel structure building. It is mainly composed of structural steel and functional materials, such as hot-rolled light-weight H-beam, light-weight welded steel section, high-frequency welding steel section, cold-formed thin-walled steel, thin-walled steel plate, thin-walled steel pipe, etc., supplemented by various decoration and connection materials, which can meet the specific use function and space requirements of the building.
濟南輕型鋼結構
Jinan light steel structure
輕鋼結構主要有三種：輕鋼門式剛架建筑鋼結構、冷彎薄壁型鋼結構和鋼管結構。起初，輕鋼結構主要用于荷載小、跨度短的建筑。自20世紀80年代以來，它被廣泛應用于倉庫、辦公室、工廠、體育設施等。重型鋼結構應為：大型石油化工廠設施、大型機械鍛造廠、港口碼頭設施、大跨度體育館、會展區域、高層或高層建筑。
There are three kinds of light steel structure: light steel portal frame building steel structure, cold-formed thin-walled steel structure and steel pipe structure. At first, light steel structure was mainly used for buildings with small load and short span. Since the 1980s, it has been widely used in warehouses, offices, factories, sports facilities and so on. Heavy steel structure should be: large petrochemical plant facilities, large mechanical forging plant, port facilities, large span gymnasium, exhibition area, high-rise or high-rise buildings.
輕鋼和重鋼沒有明確的界限。采用輕鋼結構設，考慮腹板屈曲后的強度，可以減少加勁肋的設置，減少用鋼量。這是輕鋼結構。不然會用很多鋼材，就是重型鋼結構。但輕型鋼結構一般只在起重機噸位小于20t時使用，大噸位起重機會采用重型鋼結構，輕型鋼結構的安全度不夠。
There is no clear boundary between light steel and heavy steel. In the design of web plate, the steel strength can be reduced by using the steel stiffener. This is a light steel structure. Otherwise, a lot of steel will be used, that is, heavy steel structure. However, the light steel structure is only used when the crane tonnage is less than 20t, and the heavy steel structure is used for large tonnage crane, so the safety of light steel structure is not enough.
判斷結構是重鋼還是濟南輕型鋼結構，確實沒有統一的標準，很多有經驗的設計師或者項目經理往往不能完全解釋清楚，但是我們可以用一些數據綜合考慮判斷：
It is true that there is no uniform standard for judging whether the structure is heavy steel or Jinan light steel structure. Many experienced designers or project managers can not fully explain it. However, we can use some data to comprehensively consider and judge:
1、車間起重機起重量：25噸以上，可考慮重型鋼結構。
1. Lifting capacity of workshop crane: more than 25 tons, heavy steel structure can be considered.
2、每平方米用鋼量：大于等于50KG/M2，可視為重型鋼結構。
2. Steel consumption per square meter: more than or equal to 50kg / m2, it can be regarded as heavy steel structure.
濟南輕型鋼結構
Jinan light steel structure
3、主要部件鋼板厚度：10毫米以上，少用輕鋼結構。
3. Steel plate thickness of main parts: more than 10 mm, less light steel structure.
4、還有一些參考值，比如每平方米造價、大構件重量、大跨度、結構形式、檐高等。這些可以在判斷廠房是重鋼還是輕鋼時提供經驗數據。當然，現在很多建筑既有輕鋼又有重鋼。
4. There are also some reference values, such as the cost per square meter, the weight of large components, large span, structural form, eaves, etc. These can provide empirical data for judging whether the plant is heavy steel or light steel. Of course, many buildings now have both light and heavy steel.