Iron fence, presumably everyone is not unfamiliar, in our life is also more common. There are different kinds of fence materials, including iron fence. So why do so many people like to use iron fences? What are the advantages of iron fences? Today, I'd like to briefly introduce them to you from

　　1、鐵藝護欄是鍍鋅的，然后噴涂塑料或油漆，韌性強，所以鐵藝護欄具有良好的防護性，抗沖擊力強，具有更有效的防護作用。

　　1. Iron guardrail is galvanized, then sprayed with plastic or paint, with strong toughness, so iron guardrail has good protection, strong impact resistance and more effective protection.

　　2、鐵藝柵欄后的表面噴塑處理,能吸收陽光中的紫外線,減少材料的氧化速率,在戶外鐵藝柵欄,可以確保5 - 8年不生銹,產品具有較好的抗老化性能,使用壽命。

　　2, after the iron fence, the surface spraying treatment can absorb ultraviolet rays in the sunlight, reduce the oxidation rate of the materials, and ensure the rust free products in the outdoor iron fence for 5-8 years. The products have better anti-aging performance and service life.

　　3、鐵柵欄透明度強，對展示各種物品有很大幫助，透光性好，使用非常方便，對一些物品沒有視覺沖擊。

　　3. The iron fence has strong transparency, which is very helpful for displaying various items. It has good transparency and is very convenient to use. It has no visual impact on some items.

　　鐵藝柵欄自潔效果，日常生活不需要維護成本，可做防靜電能力。

　　Iron fence self-cleaning effect, daily life does not need maintenance costs, can be anti-static ability.

　　因此，當鐵護欄長期使用時，會產生鐵銹和焊渣。那么如何才能擺脫這種情況呢?

　　Therefore, when the iron guardrail is used for a long time, it will produce rust and welding slag. So how can we get rid of this situation?

　　1. 機械處理更常用的工具有風(電)動刷、除銹、拋光輪和風(電)鏟等，借助機械力的高頻沖擊和摩擦，除銹和清除舊漆等污垢。

　　1. The most commonly used tools for mechanical treatment are wind (electric) brush, derusting, polishing wheel and wind (electric) shovel, etc. with the help of high-frequency impact and friction of mechanical force, derusting and removing old paint and other dirt.

　　2、手工處理主要采用砂布、刮刀、錘鑿、鋼絲刷、廢砂輪等工具，用手工打磨敲打鏟、電刷清除鐵銹、氧化及焊渣、灰塵等鐵欄桿表面污垢。

　　2. Manual treatment mainly uses abrasive cloth, scraper, hammer chisel, wire brush, waste grinding wheel and other tools, and uses manual grinding to knock shovel and electric brush to remove rust, oxidation, welding slag, dust and other dirt on the surface of iron railings.

　　3、化學處理是利用酸溶液的特殊配方來浸泡、溶解鐵質制品，通過化學反應來去除氧化皮、鐵銹、油脂，即所謂的“酸洗”。

　　3. Chemical treatment is to use the special formula of acid solution to soak and dissolve iron products, and to remove oxide skin, rust and grease through chemical reaction, which is called "acid pickling".

　　4、噴砂處理是采用機械離心法，以壓縮空氣、高壓水流為動力，將磨料、砂子、鋼砂噴到鐵質護欄的表面，撞擊和摩擦脫落氧化皮、鐵銹、舊漆、型砂等。

　　4. Sand blasting is a mechanical centrifugal method, which uses compressed air and high-pressure water flow as power to spray abrasives, sand and steel sand on the surface of iron guardrail, to impact and rub off oxide skin, rust, old paint, molding sand, etc.

　　以上就是對濟南鐵藝護欄市場優勢的詳細介紹，想要了解更多請點擊官網http://www.4hut75.com

　　The above is a detailed introduction to the market advantages of Jinan Tieyi guardrail. For more information, please click http://www.4hut75.com